How to reset General "Chassis intrusion Assert" on SuperMicro
1. Boot CD rom Hirens.BootCD.15.2.iso => Select Linux PartedMagic boot
2. Config IP remote connect
# sudo ifconfig eth0 up
# iconfig eth0 121.30.143.15 netmask 255.255.255.128 broadcast 121.30.143.127
# route add default gw 121.30.143.1
2. SSH Connect to "PartedMagic" default password root is partedmagic
# cd /tmp/
# wget ftp://ftp.supermicro.com/utility/SuperDoctor_II/Linux/Release/SD2_2.111.456-140922.tar.gz
# tar -xvf SD2_2.111.456-140922.tar.gz
root@PartedMagic:/tmp/superdoctor# ./quickinstall
./quickinstall: line 14: /usr/bin/clear: Input/output error
Is there an IPMI BMC card installed in this system? (y/n) y
There are two options that you can choose as the IPMI device drivers.
Linux kernel ver. | Option 1 | Option 2
-------------------+----------------------+----------------------------------
2.4.20 and earlier | YES (Recommended) | NO
| IPMI 1.5/2.0 |
2.4.21 ~ 2.4.25 | YES, IPMI 1.5/2.0 | YES (Recommended), IPMI 1.5 only
2.4.26 and later | YES, IPMI 1.5/2.0 | YES (Recommended), IPMI 1.5/2.0 *
2.6.6 and earlier | No | YES (Recommended), IPMI 1.5 only
2.6.7 and later | No | YES (Recommended), IPMI 1.5/2.0 *
-------------------+----------------------+----------------------------------
* For detail, please read the file doc/README-IPMI.htm.
*** Option 1 (smbmc driver) ***
The smbmc driver is developed by SUPERMICRO and is available at
ftp://ftp.supermicro.com/CDR-0010_2.01_for_IPMI_Server_Managment/IPMI_Solution/Linux/GPC_Agent/
*** Option 2 (IPMI drivers in kernel) ***
These drivers are available in the Linux kernel since 2.4.21 and 2.6.0.
Please have them compiled either into kernel or as modules.
Current Linux kernel ver.: 3.5.6-pmagic
Which option do you like to choose? (1 or 2) 2
List of IPMI device drivers compiled as modules for this kernel(3.5.6-pmagic):
/lib/modules/3.5.6-pmagic/kernel/drivers/char/ipmi:
total 113
-rw-r--r-- 1 root root 8956 Oct 8 2012 ipmi_devintf.ko
-rw-r--r-- 1 root root 32280 Oct 8 2012 ipmi_msghandler.ko
-rw-r--r-- 1 root root 9700 Oct 8 2012 ipmi_poweroff.ko
-rw-r--r-- 1 root root 43836 Oct 8 2012 ipmi_si.ko
-rw-r--r-- 1 root root 19272 Oct 8 2012 ipmi_watchdog.ko
248
grep: /etc/rc.local: No such file or directory
To provide the SNMP function of SuperDoctor II, do as below manually.
1. Add the following line into the file /etc/snmp/snmpd.conf.
pass .1.3.6.1.4.1.10876 /usr/sbin/sd_extension
2. Restart the SNMP agent.
root@PartedMagic:/tmp/superdoctor# ./sdt.x86
*****************************************************************************
SuperDoctor II - Linux version 2.111(140922)
Copyright(c) 1993-2014 by Super Micro Computer, Inc. http://supermicro.com/
*****************************************************************************
>> Disable monitoring of non-activated item: Fan2 Fan Speed
>> Disable monitoring of non-activated item: Fan4 Fan Speed
>> Disable monitoring of non-activated item: Fan5 Fan Speed
>> Disable monitoring of non-activated item: Fan6 Fan Speed
>> Disable monitoring of non-activated item: FanA Fan Speed
Monitored Item High Limit Low Limit Status
----------------------------------------------------------------------
Fan1 Fan Speed 300 3515
Fan3 Fan Speed 300 3524
FanB Fan Speed 300 3534
CPU1 Vcore Voltage 1.49 0.53 0.91
CPU2 Vcore Voltage 1.49 0.53 0.82
VDIMM AB Voltage 1.65 1.20 1.33
VDIMM CD Voltage 1.65 1.20 1.34
VDIMM EFGH Voltage 1.65 1.20 1.34
CPU1 VSA Voltage 1.33 0.53 0.90
CPU2 VSA Voltage 1.33 0.53 0.88
VTT Voltage 1.34 0.91 1.04
+5VSB Voltage 5.50 4.48 4.99
+1.5V Voltage 1.65 1.34 1.49
+5V Voltage 5.50 4.48 4.99
+12V Voltage 13.24 10.80 11.97
+3.3V Voltage 3.65 2.93 3.31
+3.3VSB Voltage 3.65 2.93 3.26
VBAT Voltage 3.31 2.69 3.22
CPU1 Temperature 95/203 43/109
CPU2 Temperature 95/203 47/116
System Temperature 85/185 32/89
Peripheral Temperature 85/185 40/104
PCH Temperature 95/203 45/113
Chassis Intrusion Bad Warning!
Power Supply Status Good
--------------------------------------------- Wed Nov 4 13:10:25 2015
root@PartedMagic:/tmp/superdoctor# ./sdt.x86 -r "Chassis Intrusion"
*****************************************************************************
SuperDoctor II - Linux version 2.111(140922)
Copyright(c) 1993-2014 by Super Micro Computer, Inc. http://supermicro.com/
*****************************************************************************
Done.
root@PartedMagic:/tmp/superdoctor# ./sdt.x86
*****************************************************************************
SuperDoctor II - Linux version 2.111(140922)
Copyright(c) 1993-2014 by Super Micro Computer, Inc. http://supermicro.com/
*****************************************************************************
Monitored Item High Limit Low Limit Status
----------------------------------------------------------------------
Fan1 Fan Speed 300 3506
Fan3 Fan Speed 300 3524
FanB Fan Speed 300 3488
CPU1 Vcore Voltage 1.49 0.53 0.91
CPU2 Vcore Voltage 1.49 0.53 0.82
VDIMM AB Voltage 1.65 1.20 1.33
VDIMM CD Voltage 1.65 1.20 1.34
VDIMM EFGH Voltage 1.65 1.20 1.34
CPU1 VSA Voltage 1.33 0.53 0.88
CPU2 VSA Voltage 1.33 0.53 0.88
VTT Voltage 1.34 0.91 1.04
+5VSB Voltage 5.50 4.48 4.99
+1.5V Voltage 1.65 1.34 1.49
+5V Voltage 5.50 4.48 4.99
+12V Voltage 13.24 10.80 11.97
+3.3V Voltage 3.65 2.93 3.31
+3.3VSB Voltage 3.65 2.93 3.26
VBAT Voltage 3.31 2.69 3.22
CPU1 Temperature 95/203 42/107
CPU2 Temperature 95/203 47/116
System Temperature 85/185 32/89
Peripheral Temperature 85/185 40/104
PCH Temperature 95/203 45/113
Chassis Intrusion Good
Power Supply Status Good
--------------------------------------------- Wed Nov 4 13:10:40 2015
root@PartedMagic:/tmp/superdoctor#